Before your integration technician arrives, please make sure you have the following items ready to go! Some customers have experienced success purchasing refurbished items. You are also welcome to purchase these at a local store (Sam's Club, BJ's, or Costco tend to be the best bet). Please make sure the specs are the same as the products below. (Contains affiliate links)
TV DISPLAY- choose your size
LG 55” 1080p TV: http://amzn.to/2ePTOtT
Samsung 60” 1080p TV: http://amzn.to/2f0d1pm
Samsung 75” 1080p TV: http://amzn.to/2fo92ap
If you purchase a TV separately, please make sure it has 1080p. It does not have to be a Smart TV.
TV DISPLAY EXTRAS
Chrome Bit: http://amzn.to/2f0b5Nt
Logitech Keyboard: http://amzn.to/
Required to run Chrome browser on your big screen TV's - one per TV. The Chrome Bit could be replaced with a chrome box if desired.
TV DISPLAY MOUNTS
Articulating Wall Mount: http://amzn.to/2ggZjTK
Non-articulating Mount: http://amzn.to/2f4yEYp
Ceiling Mount: http://amzn.to/2ggVsWu
OPERATOR TABLETS - choose your size, 1 per machine
MachineMetrics will pre-configure 10.1" Samsung Galaxy Tab A Tablets and include a custom enclosure, mounts, and power supply. Should you choose to purchase and configure your own tablets, the list below serves as a guide.
Samsung Galaxy Tab A, 8": http://amzn.to/2ff09ke
Samsung Galaxy Tab E, 9.7": http://amzn.to/2gh5CGA
Samsung Galaxy Tab A, 10.1": http://amzn.to/2e5uGhG
Tablet Mount: http://amzn.to/2f0cnIm
10' USB-C Cables: https://www.amazon.com/gp/product/B07VWLLBP1
10' Micro USB Cables: https://www.amazon.com/dp/B019Q6Y2MK
Otterbox Case (8"): http://amzn.to/2ghOmxk The Otterbox case allows for more custom mounting options. You can often attach the mount to the case, rather than the tablet.
Our custom tablet mounts are sourced from the following vendors:
Tablet Enclosure SKU: VB_VESA_GTA101Y19_BLK vidabox.com
Magnets for the mount base. SKU: MCHN-60 www.magnet4sale.com
The mount is composed of several parts. The required SKUs are listed below. Parts can be ordered on https://www.fastenal.com/
10272512 (Two are required per kit)
The mount requires some other hardware for assembly, this is also available from Fastenal. The required SKUs are listed as well.
- 1124049 (Two are required per kit)
- 91200 (Four are required per kit)
- 1124225 (Two are required per kit)
- 5/16 Steel washers (We do not buy these from Fastenal, but it is required for assembly. Any washer of this size and material will be sufficient)
MachineMetrics can provide you with a configured Moxa Box. However, you can also purchase one on your own. To do so, use this resource. If you purchase a Moxa Box outside of MachineMetrics, you will need to configure it.
How to Configure a Moxa Box:
Contact us at Support@machinemetrics.com.