Ben Groves
- Total activity 33
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 13
Activity overview
Latest activity by Ben Groves-
Ben Groves created an article,
Mazak Part Counting
This guide only applies to Mazak controllers that are connected to MachineMetrics using MTConnect or Fusion Client. Counter - Position ScreenThe part counter is displayed on the position screen. T...
-
Ben Groves created an article,
Connecting Zeiss CMMs via MTConnect
1. OverviewThis guide explains how to enable MTConnect connectivity on Zeiss Coordinate Measuring Machines (CMMs) for integration with MachineMetrics or other MTConnect-compatible monitoring system...
-
Ben Groves created an article,
Connecting Hexagon CMMs via MTConnect
1. OverviewThis guide explains how to enable MTConnect connectivity on Hexagon Coordinate Measuring Machines (CMMs) to integrate with MachineMetrics or other MTConnect-compatible systems.The proces...
-
Ben Groves created an article,
Introduction to Manual Stations
Manual Stations allow you to track production activity for non-connected workstations such as assembly, deburring, or inspection areas. These stations often make up 20–50% of an operator workforce ...
-
Ben Groves created an article,
Installing a Part-Count Proximity Sensor with Sealevel 170POE-ROHS
OverviewThe Sealevel 170POE-ROHS provides two optically isolated digital inputs designed for dry-contact or NPN (sinking) proximity sensors. When powered by PoE, its inputs remain fully isolated fr...
-
Ben Groves created an article,
Declaration of Readiness (DOR)
What Is the Declaration of Readiness? The Declaration of Readiness (DOR) is an important step in preparing for your MachineMetrics installation. By completing this document, you confirm that the ne...
-
Ben Groves created an article,
Connect a Generic Modbus TCP Device
🧾 OverviewThis guide walks you through the steps to connect any generic Modbus TCP device to MachineMetrics using a custom adapter script. You’ll define register mappings in YAML, apply Modbus addr...
-
Ben Groves created an article,
How to Find Rapid Dial Address on a Fanuc CNC.
1 Prepare the Machine & Work AreaSafe state – Put the machine in MDI or “zero-feed” mode, spindle stopped, and ensure no axes will move when you twist the dial.Visual access – Swing the control so ...
-
Ben Groves created an article,
Establishing and Configuring IP Settings on Sealevel 170PoE-ROHS and 170E-ROHS Modules
The Sealevel 170PoE-ROHS and 170E-ROHS are Ethernet-based I/O modules used with MachineMetrics for reliable data collection from sensors, switches, and machine signals.When setting up a new module ...
-
Ben Groves created an article,
Sealevel 170POE Overview
Table of Contents Overview Hardware Limits & Recommendations Analog Inputs Optically‑Isolated Digital Inputs Power Options & PoE Wiring Examples Current Transducer → Analog Input Green Stack L...