Many Fanuc "i" series controls have Fanuc FOCAS support, which will integrate seamlessly with MachineMetrics. To check if your control supports Fanuc FOCAS, try the following:
On the machine control, press the system hardkey, then the scroll using the right arrow softkey until you see the menu option (ETHPRM).
If you do not see a ETHPRM option your machine does not have FOCAS equipped.
If you do see ETHPRM, select it. Look for an option called either "EMBDD" or "EMBED", and hit select.
On some controls you may see an option for "FOCAS 2" if not, press the down arrow softkey until you see "FOCAS" options displayed. If you do not see either of these, then unfortunately your machine control is not capable of FOCAS data.
But fear not - we have many more ways of getting data from your machine!
If you are a current MachineMetrics customer, please contact your Customer Success Manager to discuss other data collection options. If you aren't yet a customer and have questions regarding data collection, please reach out to firstname.lastname@example.org